Why the system matters:
Forklift visibility affects 80% of forklift accidents
So they need some technologies to act as eyes to avoid the accident from happening.
How we do the Collision Avoidance:
Combined with millimeter wave radar and Lidar, our device can detect the object and pedestrian accurately.
It is divided to be 3 Zones （The scope of the zone can be adjusted within 5 meters）
Zone1. Approaching Alarming Zone
When the forklift is backing up, there will be an alarm to warn the driver and pedestrian in the Zone 1 to be careful.
Zone2. Approaching Alarming + Speed Limiting Zone
When the forklift keeping backing up from Zone 1 to Zone 2, there will be an alarm to warn the driver and pedestrian in the Zone 2 to be careful, and the device will limit and slow down the forklift speed.
Zone3. Approaching Alarming + Car Stopping Zone
When the forklift is backing up Zone 2 to Zone 3, there will be an alarm to warn the driver and pedestrian in the Zone 3 to be careful, and the device will stop the forklift by cutting the power to avoid the collision accident.
Zone4. Speed Limiting Alarming + Speed Limiting Zone
When the forklift is moving forward, the admin can also set the limit speed to it for the daily driving. And when the forklift is speeding, our device can limit the forklift and alarm to remind the driver of slowing down.
Application Scope:
For all INTERNAL COMBUSTION FORKLIFT and ELECTRIC FORKLIFT
Voltage Range:DC 12V~80V
Alarm Content can be customized to different language.
Important Parameters:
Detection Range: 5 Meters (Can be adjusted)
Alarm Decibel: 120 DB (8 degrees Can be adjusted)
Detection angle: 120°(Can be adjusted)
Water and Dust Proof: IP65, Can be working under the rain.
Installation:
Questions and Answers:
★What is the differences between Our device and the other Forklift Ultrasonic radar Forklift Collision Avoidance System:
1. The shortcoming of Ultrasonic radar one:
A.Detecting scope is small, normally it’s about 2-3 meters.
B.Detecting speed is slow.
C.Detecting angle is normally about 60°, so it needs 2-4 Ultrasonic radar when doing the installation.
2. Our device use millimeter wave radar and Lidar, which can detect the object and pedestrian in 5 meters’ scope. And our detecting speed is very fast and the angle can be reached to 120°.
★Compared with the car's reversing radar, what is the difference between the forklift's reversing detection system?
1. Due to the interference of the power supply to the radar, the car's reversing radar is prone to false alarms.
2. The car's reversing function is too simple, just reminders and alarms.
A.Detecting scope is small, normally it’s about 2-3 meters.
B.Detecting speed is slow.
C.Detecting angle is normally about 60°, so it needs 2-4 Ultrasonic radar when doing the installation.
Troy